December 6, 2022


Love your Curiosity

Ask Danny | Ep. 16: Top 5 Simple Solutions for Bathroom Maintenance

This week, Today’s Homeowner Radio Display co-host Joe Truini presents his Best 5 Basic Alternatives for the toilet.

“Today’s Homeowner” Simple Solution host Joe Truini sprays Rain-X on his shower door to remove unsightly water spots.
A glass cleaner that incorporates rain repellant will stop h2o spots from showing on shower doorways. (3 Echoes Material Studio)

H2o Spot Remover for Shower Doors

Does your glass shower doorway have water places? They’re a pain to eliminate, and typical cleaners simply cannot do the job. Perfectly, here’s a key drinking water place remover that you could already have without having realizing it!

Nobody wants to wipe their shower door each time just after they use it to avoid water spots. And let us be straightforward — who has the time for that?

That is why it allows to have the correct tool for typical upkeep.

I like to use a glass cleaner with a method that includes rain repellant — like this a single. (This is an affiliate backlink. If you obtain this solution, we will receive a tiny fee at no extra price to you.)

This kind of product is generally marketed for cleansing bugs and eliminating h2o places from car or truck or truck windshields, but that does not mean it only works on these surfaces! So look in the automotive aisle if you simply cannot discover the solution near common cleaners.

Now, why does this products function about common house cleaners?

It is because the rain-repellant formula brings about drinking water to bead up and repel off the shower door. That signifies your glass shower enclosure will have no h2o places!

Here’s how it is effective: Merely spray the cleaner on the glass and use a towel to wipe it off — I usually use a cotton microfiber towel.

Now you have an simple drinking water location remover! Not only is the glass clear, but it also repels drinking water with no recognizing.

Observe: Easy Drinking water Location Remover for Your Shower Doorway

Box of baking soda and bottle of white vinegar, seen beside a bathroom sink
Baking soda and vinegar will deodorize and cleanse your sink with out damaging the tub fixture. (3 Echoes Content material Studio)

How to Clear and Deodorize Tub Sink

It is not usually you bring baking soda and vinegar into a bathroom, but you can use them to clean up and deodorize a bathroom sink.

Sinks normally develop into sluggish-draining, and they can get clogged up with cleaning soap scum and hair. They will also produce a quite funky odor, so here’s how to get rid of that.

Get started with one-3rd cup of baking soda. You do not have to be far too specific, but you will want to take about a 3rd of a cup or so and dump it in the drain.

Next, get just one full cup of vinegar. White vinegar is a seriously powerful cleaning agent that you can use all over the property.

After it hits the baking soda, allow it fizz down for a number of minutes. Some people today may possibly use bleach right here, but bleach can really eat the finish correct off of some bathtub fixtures, so you really do not want to use it.

Following the baking soda and vinegar have calmed down a very little bit, comply with up with a whole kettle of warm water. This will, in mixture with the vinegar and the baking soda, lower via everything that could possibly be clogging up the sink.

If you do this remedy as soon as a month, you’ll have a definitely sweet-smelling sink and a absolutely free-flowing drain.

View: The Simple Way to Clean up and Deodorize Your Sink

inside of a toilet tank showing flapper valve
Flappers have two essential work opportunities: They provide a seal for the toilet’s flush valve and regulate the volume of drinking water unveiled into the bowl. (3 Echoes Content material Studio)

How to Replace a Rest room Flapper Valve

If you have a toilet that is continuously running, the culprit is probably a leaky flapper valve. In excess of time, flapper valves might turn into cracked or warped, which can allow for water to leak out.

Here’s how to substitute it:

  • Switch the water off to your bathroom.
  • Flush the h2o out so the tank is vacant
  • Unhook the old flapper valve and snap on the new one particular.
  • Change the chain to make certain the size is accurate.
  • Change the h2o back on and flush the toilet a few of moments to make guaranteed the flapper valve is performing appropriately.

Look at: How to Switch Toilet Flapper Valve

A do-it-yourself scrub brush drill attachment chucked into a drill is perfect for detailing tile flooring. (3 Echoes Content Studio)

How to Electric power-Clear Bath Tiles

Scrub brushes get the job done nicely for cleaning, but they call for a whole lot of elbow grease. To change a conventional hand scrub brush into a electric power attachment for your drill:

  1. Reduce the tackle off a round scrub brush.
  2. Drill a gap in the center of the brush.
  3. Insert a 4-inch very long machine bolt in the hole from the bristle aspect.
  4. Set a washer and nut on the back again aspect and tighten it up.
  5. Chuck the bolt into a drill.
  6. Operate the drill at medium speed when making use of the scrub brush attachment.

View: How to Cleanse Tiles A lot quicker Than Ever

Using vinegar to clean a clogged showerhead.
Use vinegar and a plastic bag to cleanse a clogged showerhead. (3 Echoes Content Studio)

How to Cleanse a Clogged Showerhead

Showerhead spray nozzles can develop into clogged around time with mineral deposits found in faucet water.

To clear a showerhead so it sprays uniformly:

  • Location a plastic bag stuffed with white distilled vinegar above the showerhead.
  • Connect a twist tie all-around the showerhead arm to keep the bag in spot.
  • Allow for the showerhead to soak in the vinegar for 1 to two days.
  • Remove the bag and convert the showerhead on complete drive.

If the nozzles are still clogged, repeat the soaking system till very clear.

View: How to Clear a Clogged Showerhead

Additional Looking at